Sale ends soon!
Feature: 1.Professional Design 4th Axis gimbal stabilizer for DJI Ronin S ,OSMO Pro,Crane Plus Gimbal ZHIYUN/FEIYU.2. The 4th Axis stabilizer helps to stabilize the up and down movement when using 3 Axis camera gimbals, which will produces at least 30% smoother footage. Get smooth footage with ease.3. Damping system design has gooddamping effect. Dual independent adjustable fluid damping – from hard action to soft shots. 4. The direction of the handle will be adjusted, and there are 1/4ââ screw hole on the ends of the handle which will allow to mount another devices. 5. 4th Axis stabilizer fine adjustment of oil pressure according to different weights and different usage environments. 6. The handle diameters of 2CM-5CM. Packing list: 1* 4th axis stabilizer 2* Spring (payload: 0.9-2.5kg) 2* Spring (payload:2.3-4kg) 2* L-shaped hex screwdriver 4* Spare screw 1* Disassembly tool 1* Quick mounting plate fixing accessories 1*Instruction manual Notice: â How to mount your device to 4th axis stabilizer1.Insert your device to the hub of the 4th stabilizer.2.Tighten the 4 screws on hub mount.3.Take up the stabilizer and observe both armsâ level.4.Adjust the spring tension of both arms by the knob near handle5.Check if both arms are at the same level.6.If not, please tune the left and right damping knobs to minimum position, and test filming. If the effect is not good, and then fine tune the knob agin until the springback is minimum. â¡How to replace springs1.Remove the screw and nuts near hub on spring with removal tool and hexagonal wrench, and then remove the spring.2.Remove the screw and nuts on arm near handle with removal tool and hexagonal wrench.3.Mount the one side hook of the selected spring with the screw and the nuts.4.Fix the other hook of the spring and the arm.